Widescreen Wallpapers

I have installed a game, Titan Quest, both the original and the expansion pack. However it prompts with a message ‘can’t initialize graphics engine’, and doesn’t play at all. This comes after full installation.

My system information is as follows. Please help?
——————
System Information
——————
Time of this report: 2/22/2011, 21:45:54
Machine name: D1BPNS1S
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Vostro 200
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2 CPUs)
Memory: 3318MB RAM
Page File: 736MB used, 4463MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode

————
DxDiag Notes
————
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.

——————–
DirectX Debug Levels
——————–
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

—————
Display Devices
—————
Card name: Intel(R) G33/G31 Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) GMA 3100
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_29C2&SUBSYS_02381028&REV_02
Display Memory: 128.0 MB
Current Mode: 1440 x 900 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: igxprd32.dll
Driver Version: 6.14.0010.4820 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 6/13/2007 19:21:16, 57344 bytes
WHQL Logo’d: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: igxpmp32.sys
Mini VDD Date: 6/13/2007 19:21:16, 5760096 bytes
Device Identifier: {D7B78E66-6A82-11CF-4C61-3222A3C2CB35}
Vendor ID: 0×8086
Device ID: 0×29C2
SubSys ID: 0×02381028
Revision ID: 0×0002
Revision ID: 0×0002
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run

I have installed a game, Titan Quest, both the original and the expansion pack. However it prompts with a message ‘can’t initialize graphics engine’, and doesn’t play at all. This comes after full installation.

My system information is as follows. Please help?
——————
System Information
——————
Time of this report: 2/22/2011, 21:45:54
Machine name: D1BPNS1S
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Vostro 200
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2 CPUs)
Memory: 3318MB RAM
Page File: 736MB used, 4463MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode

————
DxDiag Notes
————
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.

——————–
DirectX Debug Levels
——————–
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

—————
Display Devices
—————
Card name: Intel(R) G33/G31 Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) GMA 3100
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_29C2&SUBSYS_02381028&REV_02
Display Memory: 128.0 MB
Current Mode: 1440 x 900 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: igxprd32.dll
Driver Version: 6.14.0010.4820 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 6/13/2007 19:21:16, 57344 bytes
WHQL Logo’d: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: igxpmp32.sys
Mini VDD Date: 6/13/2007 19:21:16, 5760096 bytes
Device Identifier: {D7B78E66-6A82-11CF-4C61-3222A3C2CB35}
Vendor ID: 0×8086
Device ID: 0×29C2
SubSys ID: 0×02381028
Revision ID: 0×0002
Revision ID: 0×0002
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run

Hello!
I’ve installed windows 7 pro 64bit…(i have radeon 5570)
installed the latest catalyst drivers & it set the resolution to the annoying recommended 1440 x 900
resolution which is awfull…I need to change to 1024 x 768 or at least 1280 x 800..but it doesnt fill the screen on neither of them…(and the auto fit button on my preview monitor doesnt work…)
Help me please!
The problem with 1440 x 900 is that evrything is too small for me…I dont have 100% eyesight..not even close…so i need to reduce the resolution….

Im going to buy Battlefield: Bad Company 2 and the vietnam add on and I want to know if my computer could play it.
this is what I got off of steam for my computer info

Processor Information:
Vendor: GenuineIntel
Speed: 2161 Mhz
2 logical processors
2 physical processors
HyperThreading: Unsupported
FCMOV: Supported
SSE2: Supported
SSE3: Supported
SSSE3: Supported
SSE4a: Unsupported
SSE41: Unsupported
SSE42: Unsupported

Network Information:
Network Speed:

Operating System Version:
Windows Vista (32 bit)
NTFS: Supported
Crypto Provider Codes: Supported 323 0×0 0×0 0×0

Video Card:
Driver: ATI Mobility Radeon HD 3650

DirectX Driver Name: atiumdag.dll
Driver Version: 7.01.01.747
DirectX Driver Version: 7.14.10.567
Driver Date: 4 May 2008
Desktop Color Depth: 32 bits per pixel
Monitor Refresh Rate: 60 Hz
DirectX Card: ATI Mobility Radeon HD 3650
VendorID: 0×1002
DeviceID: 0×9591
Number of Monitors: 1
Number of Logical Video Cards: 1
No SLI or Crossfire Detected
Primary Display Resolution: 1440 x 900
Desktop Resolution: 1440 x 900
Primary Display Size: 20.00″ x 12.52″ (23.58″ diag)
50.8cm x 31.8cm (59.9cm diag)
Primary Bus Type Not Detected
Primary VRAM: 256 MB
Supported MSAA Modes: 2x 4x 8x

Sound card:
Audio device: Speakers / Headphones (IDT High

Memory:
RAM: 3069 Mb

Miscellaneous:
UI Language: English
Microphone: Not set
Media Type: DVD
Total Hard Disk Space Available: 305093 Mb
Largest Free Hard Disk Block: 140485 Mb
Steam Hard Disk Usage: 33 Mb
OS Install Date: Feb 18 2009
Game Controller: None detected

Hello all,
I am having an issue with Photoshop CS5 (Windows). When using the keyboard, the current tool I am using will switch to a different one! For example, these are the steps I take when the problems occur:
1. open document
2. Ctrl + Alt 0 for actual pixels
3. Spacebar + click and drag down to move to specific part
4. T for text tool
5. click on text
6. Type “hello world”
7. Ctrl + Enter to finish writing
8. V
9. Click and drag content
10. T to select and edit a different block of text
11. Press left key twice
1. Photohsop escapes the text and changes the tool back to Move Tool (V)
2. Press T again to go back to text tool

Something else it is doing is the use of keyboard in Layer Style (something I didn’t realise was linked until now)
1. T (text tool) in use
2. double click layer for layer style,
3. Select Color Overlay
1. chose color with mouse (#ff0000)
2. change opacity with keyboard (type 50)
3. press up to change opacity to 60
Screen flickers, Photoshop defaults to Move Tool
4. Press OK to confirm Layer Style
Nothing happens (Layer style stays open)
5. Press Enter to confirm Layer Style
Nothing happens (Layer style stays open)
5. Press Escape
Layer Style closes, sometimes it keeps what I have done, sometimes it doesn’t!

I’m very dependant on keyboard shortcuts and I’ve tried a variety of combinations of the first steps (1 - 11) e.g. without using Ctrl, alt or spacebar.

All of these actions seem to be linked with the keyboard, however Photoshop is the only application on my computer that demonstrates this sort of behavior.

Recent attempts to correct it:
Uninstalled and re-installed Photoshop
Updated hardware drivers
Cleared Preffs
Updated photoshop
OpenGL on and off, with basic, normal and advanced
Legacy Keyboard on and off
UI Language as English UK
Cache Levels changed to 8 and Cahce Tile Size to 1028k (seriously increased performance! but no fix)
Type settings unticked all.
Disabled dual screen.
Corrected “Alt” menu shortcut locking the keyboard (this wasn’t an issue in the first place but wanted to be sure)

Other info:

Adobe Photoshop Version: 12.0.3 (12.0.3×20101211 [20101211.r.1222 2010/12/11:02:00:00 cutoff; r branch]) x32
Operating System: Windows XP 32-bit
Version: 5.1 Service Pack 3
System architecture: Intel CPU Family:6, Model:5, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 2
Processor speed: 3200 MHz
Built-in memory: 1975 MB
Free memory: 543 MB
Memory available to Photoshop: 1619 MB
Memory used by Photoshop: 68 %
Image tile size: 1024K
Image cache levels: 5
Display: 2
Display Bounds:= top: 0, left: 1440, bottom: 900, right: 2880
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 900, right: 1440
Video Card Number: 1
Video Card: NVIDIA Quadro FX 580
Driver Version: 6.14.12.6645
Driver Date: 20110111092351.798638-000
Video Card Driver: nv4_disp.dll
Video Mode: 1440 x 900 x 4294967296 colors
Video Card Caption: NVIDIA Quadro FX 580
Video Card Memory: 512 MB
Video Card Number: 1
Video Card: NVIDIA Quadro FX 580
Driver Version: 6.14.12.6645
Driver Date: 20110111092351.798638-000
Video Card Driver: nv4_disp.dll
Video Mode: 1440 x 900 x 4294967296 colors
Video Card Caption: NVIDIA Quadro FX 580
Video Card Memory: 512 MB

Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 232.9G, 191.4G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5\Plug-ins\
Additional Plug-ins folder: not set

Any help is greatly appreciated!
_____________EDIT____________________

crsimon36, thanks for the feedback, scrolling through text while editing is a normal thing to do, considering the need for correcting spelling mistakes, adding to and editing text; text editing is only one example to the extent of the problem to iterate the above.
I would consider myself an advanced Photoshop user, and as I have said, I depend heavily on Keyboard shortcuts to switch between tool, the problem occurs on any tool that requires me to use the keyboard.

Raven,
I’ve tried all of the OpenGL settings and unfortunately, none of them have made a difference, I’m not experiencing any errors in terms of images. I’m not too hasty to dismiss the problem could in fact be that I need more RAM, but software performance suggests this is not the issue as I rarely experience lagging of any kind, although mostly due to the performance from the i5 processor and the FX 580 graphics card.
Unfortunately, I don’t have an alternative for the scratch-disk, th

There’s a new IPS LCD mobile screen by Hitatchi that is 4.5-inches across and boasts a 720 x 1280 resolution. At 329dpi, it’s even sharper than the iPhone 4’s 326dpi Retina Display. [Hitachi via Engadget] More »

If i go to start put in DXDIAG it says on system Machine name: HP-PC
Operating System: Windows 7 Home Premium 32-bit (6.1, Build 7600) (7600.win7_gdr.100618-1621)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP G70 Notebook PC
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz (2 CPUs), ~2.2GHz
Memory: 3072MB RAM
Available OS Memory: 3004MB RAM
Page File: 1157MB used, 4846MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode

on Display Card name: Mobile Intel(R) 4 Series Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Mobile Intel(R) 4 Series Express Chipset Family
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_2A42&SUBSYS_360B103C&REV_07
Display Memory: 1309 MB
Dedicated Memory: 64 MB
Shared Memory: 1245 MB
Current Mode: 1440 x 900 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: unknown
Monitor Id: AUO6287
Native Mode: 1440 x 900(p) (59.996Hz)
Output Type: Internal
Driver Name: igdumdx32.dll,igd10umd32.dll
Driver File Version: 8.15.0010.2202 (English)
Driver Version: 8.15.10.2202
DDI Version: 10
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 8/25/2010 19:28:22, 571904 bytes
WHQL Logo’d: Yes
WHQL Date Stamp:
Device Identifier: {D7B78E66-6902-11CF-167B-0116A7C2C535}
Vendor ID: 0×8086
Device ID: 0×2A42
SubSys ID: 0×360B103C
Revision ID: 0×0007
Driver Strong Name: oem21.inf:Intel.Mfg:iCNT0:8.15.10.2202:pci\ven_8086&dev_2a42
Rank Of Driver: 00E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeWMV9_B ModeWMV9_C ModeVC1_B ModeVC1_C

is it good for that game

hi, i have a viewsonic VA1703wb Moniter And Windows vista home basic. i recently did a fresh install of windows and the moniters resoultion is messed up. i have downloaded the driver from the viewsonic website. in the control pannel (under “adjust resolution”) the correct resolution isnt among the options. i also keep getting a windows that pops up and says “for best results change resolution to 900 x 1440″ which i cant do because it isnt in the menu. any ideas???? i need it fixed badly!
@milan, how would i do that?